NGFW-ENGINEER EXAM PREP & NGFW-ENGINEER STUDY GUIDE & NGFW-ENGINEER ACTUAL TEST

NGFW-Engineer Exam Prep & NGFW-Engineer Study Guide & NGFW-Engineer Actual Test

NGFW-Engineer Exam Prep & NGFW-Engineer Study Guide & NGFW-Engineer Actual Test

Blog Article

Tags: Vce NGFW-Engineer Files, New NGFW-Engineer Test Pattern, NGFW-Engineer Test Pass4sure, Valid NGFW-Engineer Exam Forum, Training NGFW-Engineer Materials

It is very necessary for a lot of people to attach high importance to the NGFW-Engineer exam. It is also known to us that passing the exam is not an easy thing for many people, so a good study method is very important for a lot of people, in addition, a suitable study tool is equally important, because the good and suitable NGFW-Engineer Study Materials can help people pass the exam in a relaxed state.

Everyone wants to have a good job and decent income. But if they don’t have excellent abilities and good major knowledge they are hard to find a decent job. Passing the test NGFW-Engineer certification can make you realize your dream and find a satisfied job. Our study materials are a good tool that can help you pass the exam easily. You will feel convenient if you buy our product not only because our NGFW-Engineer Exam Prep is of high pass rate but also our service is also perfect. What’s more, our update can provide the latest and most useful NGFW-Engineer exam guide to you, in order to help you learn more and master more.

>> Vce NGFW-Engineer Files <<

New Palo Alto Networks NGFW-Engineer Test Pattern & NGFW-Engineer Test Pass4sure

Printing these NGFW-Engineer valid questions and reading them in a handy paper format is another feature offered by VCEDumps Palo Alto Networks NGFW-Engineer PDF for test applicants who prefer more conventional reading experience. These incredible features of Palo Alto Networks NGFW-Engineer PDF Questions help applicants practice for the NGFW-Engineer exam wherever and whenever they want, according to their timetables.

Palo Alto Networks NGFW-Engineer Exam Syllabus Topics:

TopicDetails
Topic 1
  • PAN-OS Device Setting Configuration: This section evaluates the expertise of System Administrators in configuring device settings on PAN-OS. It includes implementing authentication roles and profiles, and configuring virtual systems with interfaces, zones, routers, and inter-VSYS security. Logging mechanisms such as Strata Logging Service and log forwarding are covered alongside software updates and certificate management for PKI integration and decryption. The section also focuses on configuring Cloud Identity Engine User-ID features and web proxy settings.
Topic 2
  • PAN-OS Networking Configuration: This section of the exam measures the skills of Network Engineers in configuring networking components within PAN-OS. It covers interface setup across Layer 2, Layer 3, virtual wire, tunnel interfaces, and aggregate Ethernet configurations. Additionally, it includes zone creation, high availability configurations (active
  • active and active
  • passive), routing protocols, and GlobalProtect setup for portals, gateways, authentication, and tunneling. The section also addresses IPSec, quantum-resistant cryptography, and GRE tunnels.
Topic 3
  • Integration and Automation: This section measures the skills of Automation Engineers in deploying and managing Palo Alto Networks NGFWs across various environments. It includes the installation of PA-Series, VM-Series, CN-Series, and Cloud NGFWs. The use of APIs for automation, integration with third-party services like Kubernetes and Terraform, centralized management with Panorama templates and device groups, as well as building custom dashboards and reports in Application Command Center (ACC) are key topics.

Palo Alto Networks Next-Generation Firewall Engineer Sample Questions (Q47-Q52):

NEW QUESTION # 47
When integrating Kubernetes with Palo Alto Networks NGFWs, what is used to secure traffic between microservices?

  • A. Service graph
  • B. Ansible automation modules
  • C. Panorama role-based access control
  • D. CN-Series firewalls

Answer: D

Explanation:
When integrating Kubernetes with Palo Alto Networks NGFWs, the CN-Series firewalls are specifically designed to secure traffic between microservices in containerized environments. These firewalls provide advanced security features like Application Identification (App-ID), URL filtering, and Threat Prevention to secure communication between containers and microservices within a Kubernetes environment.


NEW QUESTION # 48
In regard to the Advanced Routing Engine (ARE), what must be enabled first when configuring a logical router on a PAN-OS firewall?

  • A. Plugin
  • B. Content update
  • C. General setting
  • D. License

Answer: D

Explanation:
To enable the Advanced Routing Engine (ARE) on a Palo Alto Networks firewall, the license for the ARE must be applied first. Without the proper license, the firewall cannot activate and use the advanced routing features provided by ARE, such as support for more complex routing protocols (e.g., BGP, OSPF, etc.).
Once the license is applied and validated, the routing engine can be configured, allowing the creation of logical routers and routing policies.


NEW QUESTION # 49
An NGFW engineer is configuring multiple Layer 2 interfaces on a Palo Alto Networks firewall, and all interfaces must be assigned to the same VLAN. During initial testing, it is reported that clients located behind the various interfaces cannot communicate with each other.
Which action taken by the engineer will resolve this issue?

  • A. Configure each interface to belong to the same Layer 2 zone and enable IP routing between them.
  • B. Assign each interface to the appropriate Layer 2 zone and configure a policy that allows traffic within the VLAN.
  • C. Enable IP routing between the interfaces and configure a Security policy to allow traffic between interfaces within the VLAN.
  • D. Assign each interface to the appropriate Layer 2 zone and configure Security policies for interfaces not assigned to the same zone.

Answer: B

Explanation:
In a Layer 2 configuration, interfaces are typically grouped into the same Layer 2 zone. When the interfaces are assigned to the same VLAN, the firewall will treat them as part of the same broadcast domain.
In a Layer 2 setup, interfaces must be in the same Layer 2 zone to allow the traffic within the same VLAN to pass. Additionally, a security policy must be configured to allow traffic within this VLAN or zone. This will resolve the issue by ensuring that traffic is permitted between clients behind different interfaces assigned to the same VLAN.


NEW QUESTION # 50
After an engineer configures an IPSec tunnel with a Cisco ASA, the Palo Alto Networks firewall generates system messages reporting the tunnel is failing to establish.
Which of the following actions will resolve this issue?

  • A. Validate the tunnel interface VLAN against the peer's configuration.
  • B. Ensure that an active static or dynamic route exists for the VPN peer with next hop as the tunnel interface.
  • C. Configure the Proxy IDs to match the Cisco ASA configuration.
  • D. Check that IPSec is enabled in the management profile on the external interface.

Answer: C

Explanation:
The Proxy IDs (or Traffic Selectors) define the local and remote subnets that are allowed to communicate over the IPSec tunnel. If the Proxy IDs on the Palo Alto Networks firewall do not match the configuration on the Cisco ASA, the tunnel will fail to establish because the firewalls won't agree on which traffic to encrypt. Ensuring that the Proxy IDs match between the Palo Alto Networks firewall and the Cisco ASA will resolve the issue.


NEW QUESTION # 51
Which statement applies to Log Collector Groups?

  • A. Enabling redundancy increases the log processing traffic in a Collector Group by 50%.
  • B. In any single Collector Group, all the Log Collectors must run on the same Panorama model.
  • C. The maximum number of Log Collectors in a Log Collector Group is 18 plus two hot spares.
  • D. Log redundancy is available only if each Log Collector has the same amount of total disk storage.

Answer: C

Explanation:
The maximum number of Log Collectors that can be added to a Log Collector Group is 18 plus 2 hot spares, ensuring redundancy and availability in case of failure. This allows for a total of up to 20 Log Collectors in a group, providing sufficient scalability and reliability for log collection.


NEW QUESTION # 52
......

Our company constantly increases the capital investment on the research and innovation of our NGFW-Engineer training materials and expands the influences of our NGFW-Engineer study materials in the domestic and international market. Because the high quality and passing rate of our NGFW-Engineer Practice Questions more than 98 percent that clients choose to buy our study materials when they prepare for the test NGFW-Engineer certification. We have established a good reputation among the industry and the constantly-enlarged client base.

New NGFW-Engineer Test Pattern: https://www.vcedumps.com/NGFW-Engineer-examcollection.html

Report this page